Sectioned Tank Gauges Reflex LGP Series Catalog

These sectioned tank gauges are used to observe the level of a tank at a specific point within it, especially in applications where operational conditions do not allow the use of other types of level indication. Examples include high pressures, highly corrosive environments, or situations where leaks cannot be tolerated. Due to their type of indication, they have two observation points and can use protective micas, as well as PCTFE shields.

The connections can be threaded or flanged, and these devices can withstand pressures ranging from 0 PSI to 1500 PSI. They can be manufactured in carbon steel with an anti-corrosive coating or in stainless steel.

The glasses are made of borosilicate 3.3 glass according to the international standard DIN7081, which guarantees the proper functioning of the glasses under high-pressure and high-temperature conditions.

For operating pressure, these DOUGLASS devices are limited to 4000 PSI with non-corrosive fluids at room temperature, without steam, and without chemical attack on the glass when in direct contact with it. If protective micas are used under these conditions, they can withstand up to 5000 PSI.

The pressure is limited to 500 PSI with hot fluids and saturated steam (these conditions make the fluid highly alkaline, causing glass attack). In these conditions, and with protective micas, the maximum working pressure is 1500 PSI.

Sectioned for Reflex Tank LGP-Series Douglass
Sectioned for Reflex Tank LGP-Series. Douglass